The Solar Electron and Proton Telescope aboard STEREO — understanding proton spectra

S. Wraase, B. Heber, S. Böttcher, N. Dresing, P. Kühl, R. Müller-Mellin

The Solar Electron and Proton Telescope (SEPT) aboard the Solar Terrestrial Relations Observatory (STEREO) is designed to provide the three-dimensional distribution of energetic electrons and protons with good energy and time resolution. Each SEPT instrument consists of two double-ended magnet/foil particle telescopes which cleanly separate and measure electrons in the energy range from 30 keV to 400 keV and protons from 60 keV to 7000 keV. Anisotropy information on a non spinning spacecraft is provided by two separate but identical instruments: SEPT-E aligned along the Parker spiral magnetic field in the ecliptic plane along looking both towards and away from the Sun, and SEPT-NS aligned vertical to the ecliptic plane looking towards North and South. The dual set-up refers to two adjacent sensor apertures for each of the four viewing directions SUN, ANTISUN, NORTH, and SOUTH: one for protons, one for electrons. In this contribution a simulation of SEPT utilizing the GEANT4 toolkit has been set up with an extended instrument model in order to calculate improved response functions of the four different telescopes. This will help to understand and correct instrumental effects in the measurements.

Original Article:

Production of sunspots and their effects on the corona and solar wind: Insights from a new 3D flux-transport dynamo model

Rohit Kumar, Laurène Jouve, Rui F. Pinto, Alexis P. Rouillard

We present a three-dimensional numerical model for the generation and evolution of the magnetic field in the solar convection zone, in which sunspots are produced and contribute to the cyclic reversal of the large-scale magnetic field. We then assess the impact of this dynamo-generated field on the structure of the solar corona and solar wind. This model solves the induction equation in which the velocity field is prescribed. This velocity field is a combination of a solar-like differential rotation and meridional circulation. We develop an algorithm that enables the magnetic flux produced in the interior to be buoyantly transported towards the surface to produce bipolar spots. We find that those tilted bipolar magnetic regions contain a sufficient amount of flux to periodically reverse the polar magnetic field and sustain dynamo action. We then track the evolution of these magnetic features at the surface during a few consecutive magnetic cycles and analyze their effects on the topology of the corona and on properties of the solar wind (distribution of streamers and coronal holes, and of slow and fast wind streams) in connection with current observations of the Sun.

Original Article:

The energy-dependent position of the IBEX ribbon due to the solar wind structure

Paweł Swaczyna, Maciej Bzowski, Justyna M. Sokół

Observations of energetic neutral atoms (ENAs) allow for remote studies of the plasma condition in the heliosphere and the neighboring local interstellar medium. The first IBEX results revealed an arc-like enhancement of the ENA intensity in the sky, known as the ribbon. The ribbon was not expected from the heliospheric models prior to the IBEX launch. One of the proposed explanations of the ribbon is the mechanism of the secondary ENA emission. The ribbon reveals energy-dependent structure in the relative intensity along its circumference and in the position. Namely, the ribbon geometric center varies systematically by about 10$^\circ$ in the energy range 0.7-4.3 keV. Here, we show by analytic modeling that this effect is a consequence of the helio-latitudinal structure of the solar wind reflected in the secondary ENAs. Along with a recently measured distance to the ribbon source just beyond the heliopause, our findings support the connection of the ribbon with the local interstellar magnetic field by the mechanism of the secondary ENA emission. However, the magnitude of the center shift in the highest IBEX energy channel is much larger in the observations than expected from the modeling. This may be due to another, not currently recognized, process of ENA generation.

Original Article:

Evidence For The Magnetic Breakout Model in an Equatorial Coronal-Hole Jet

Pankaj Kumar, Judith T. Karpen, Spiro K. Antiochos, Peter F. Wyper, C. Richard DeVore, Craig E. DeForest

Small, impulsive jets commonly occur throughout the solar corona, but are especially visible in coronal holes. Evidence is mounting that jets are part of a continuum of eruptions that extends to much larger coronal mass ejections and eruptive flares. Because coronal-hole jets originate in relatively simple magnetic structures, they offer an ideal testbed for theories of energy buildup and release in the full range of solar eruptions. We analyzed an equatorial coronal-hole jet observed by SDO/AIA on 09 January 2014, in which the magnetic-field structure was consistent with the embedded-bipole topology that we identified and modeled previously as an origin of coronal jets. In addition, this event contained a mini-filament, which led to important insights into the energy storage and release mechanisms. SDO/HMI magnetograms revealed footpoint motions in the primary minority-polarity region at the eruption site, but show negligible flux emergence or cancellation for at least 16 hours before the eruption. Therefore, the free energy powering this jet probably came from magnetic shear concentrated at the polarity inversion line within the embedded bipole. We find that the observed activity sequence and its interpretation closely match the predictions of the breakout jet model, strongly supporting the hypothesis that the breakout model can explain solar eruptions on a wide range of scales.

Original Article:

Superoscillations in solar MHD waves and their possible role in heating coronal loops

A. López Ariste, M. Facchin

Aims: To study the presence of superoscillations in coronal magnetoacoustic waves and its possible role in heating coronal loops through the strong and localized gradients they generate on the wave. Methods: An analytic model is built for the transition between a sausage and a kink wave modes propagating along field lines in the corona. We compute in this model the local frequencies, the wave gradients and the associated heating rates due to compressive viscosity. Results: We find superoscillations associated with the transition between wave modes accompanying the wave dislocation that shifts through the wave domain. Frequencies 10 times higher than the normal frequency are found. This means that a typical 3-minute coronal wave will locally oscillate in 10 to 20 seconds. Such high frequencies bring up strong gradients that efficiently dissipate the wave through compressive viscosity. We compute the associated heating rates. Locally, they are very strong, largely compensating typical radiative losses.

Conclusions: We find a new heating mechanism associated to magnetoacoustic waves in the corona. Heating due to superoscillations only happens along particular field lines with small cross sections, comparable in size to coronal loops, inside the much larger magnetic flux tubes and wave propagation domain.

Original Article:

Coronal Elemental Abundances in Solar Emerging Flux Regions

Deborah Baker, David H. Brooks, Lidia van Driel-Gesztelyi, Alexander James, Pascal Demoulin, David M. Long, Harry P. Warren, David R. Williams

The chemical composition of solar and stellar atmospheres differs from that of their photospheres. Abundances of elements with low first ionization potential (FIP) are enhanced in the corona relative to high FIP elements with respect to the photosphere. This is known as the FIP effect and it is important for understanding the flow of mass and energy through solar and stellar atmospheres. We used spectroscopic observations from the Extreme-ultraviolet Imaging Spectrometer (EIS) onboard the Hinode observatory to investigate the spatial distribution and temporal evolution of coronal plasma composition within solar emerging flux regions inside a coronal hole. Plasma evolved to values exceeding those of the quiet Sun corona during the emergence/early decay phase at a similar rate for two orders of magnitude in magnetic flux, a rate comparable to that observed in large active regions containing an order of magnitude more flux. During the late decay phase, the rate of change was significantly faster than what is observed in large, decaying active regions. Our results suggest that the rate of increase during the emergence/early decay phase is linked to the fractionation mechanism leading to the FIP effect, whereas the rate of decrease during the later decay phase depends on the rate of reconnection with the surrounding magnetic field and its plasma composition.

Original Article:

Verification of real-time WSA-ENLIL+Cone simulations of CME arrival-time at the CCMC from 2010-2016

A. M. Wold, M. L. Mays, A. Taktakishvili, L. K. Jian, D. Odstrcil, P. MacNeice

The Wang-Sheeley-Arge (WSA)-ENLIL+Cone model is used extensively in space weather operations world-wide to model CME propagation. As such, it is important to assess its performance. We present validation results of the WSA-ENLIL+Cone model installed at the Community Coordinated Modeling Center (CCMC) and executed in real-time by the CCMC space weather team. CCMC uses the WSA-ENLIL+Cone model to predict CME arrivals at NASA missions throughout the inner heliosphere. In this work we compare model predicted CME arrival-times to in-situ ICME leading edge measurements at STEREO-A, STEREO-B, and Earth (Wind and ACE) for simulations completed between March 2010-December 2016 (over 1,800 CMEs). We report hit, miss, false alarm, and correct rejection statistics for all three locations. For all predicted CME arrivals, the hit rate is 0.5, and the false alarm rate is 0.1. For the 273 events where the CME was predicted to arrive at Earth, STEREO-A, or STEREO-B, and was actually observed (hit event), the mean absolute arrival-time prediction error was 10.4 +/- 0.9 hours, with a tendency to early prediction error of -4.0 hours. We show the dependence of the arrival-time error on CME input parameters. We also explore the impact of the multi-spacecraft observations used to initialize the model CME inputs by comparing model verification results before and after the STEREO-B communication loss (since September 2014) and STEREO-A sidelobe operations (August 2014-December 2015). There is an increase of 1.7 hours in the CME arrival time error during single, or limited two-viewpoint periods, compared to the three-spacecraft viewpoint period. This trend would apply to a future space weather mission at L5 or L4 as another coronagraph viewpoint to reduce CME arrival time errors compared to a single L1 viewpoint.

Original Article: