# Chromospheric response during the precursor and the main phase of a B6.4 flare on August 20, 2005

Solar flare precursors depict constrained rate of energy release contrasting the imminent rapid energy release which calls for different regime of plasma processes to be at play. Due to subtle emission during the precursor phase, its diagnostics remain delusive, revealing either the non-thermal electrons (NTEs) or the thermal conduction to be the driver. In this regard, we investigate the chromospheric response during various phases of a B6.4 flare on August 20, 2005. Spatio-temporal investigation of flare ribbon enhancement during the precursor phase, carried out using spectra-images recorded in several wavelength positions on the H-alpha line profile, revealed its delayed response (180 seconds) compared to the X-ray emission, as well as sequential increment in the width of the line-profile which are indicative of a slow heating process. However, energy contained in the H-alpha emission during the precursor phase reach as high as 80% of that estimated during the main phase. Additionally, the plasma hydrodynamics during the precursor phase, as resulted from the application of a single-loop one-dimensional model, revealed the presence of power-law extension in the model generated X-ray spectra, with flux lower than the RHESSI background. Therefore, our multi-wavelength diagnostics and hydrodynamical modeling of the precursor emission indicates the role of a two-stage process. Firstly, reconnection triggered NTEs, although too small in flux to overcome the observational constraints, thermalize in the upper chromosphere. This leads to the generation of a slow conduction front which causes plasma heating during the precursor phase.

Original Article: http://arxiv.org/abs/1804.02632

# Modelling variability of solar activity cycles

Context. Solar activity cycles vary in amplitude and duration. The variations can be at least partly explained by fluctuations in dynamo parameters. Aims. We want to restrict uncertainty in fluctuating dynamo parameters and find out which properties of the fluctuations control the amplitudes of the magnetic field and energy in variable dynamo cycles. Methods. A flux-transport model for the solar dynamo with fluctuations of the Babcock-Leighton type $\alpha$-effect was applied to generate statistics of magnetic cycles for our purposes. The statistics were compared with data on solar cycle periods to restrict the correlation time of dynamo fluctuations. Results. A characteristic time of fluctuations in the $\alpha$-effect is estimated to be close to the solar rotation period. The fluctuations produce asymmetry between the times of rise and descent of dynamo cycles, the rise time being on average shorter. The affect of the fluctuations on cycle amplitudes depends on the phase of the cycle in which the fluctuations occur. Negative fluctuations (decrease in $\alpha$) in the rise phase delay decay of poloidal field and increase the cycle amplitude in toroidal field and magnetic energy. Negative fluctuation in the decline phase reduces the polar field at the end of a cycle and the amplitude of the next cycle. The low amplitude of the 24th solar cycle compared to the preceding 23rd cycle can be explained by this effect. Positive fluctuations in the descent phase enhance the magnetic energy of the next cycle by increasing the seed poloidal field for the next cycle. The statistics of the computed energies of the cycles suggest that superflares of $\ge 10^{34}$ erg are not possible on the Sun.

Original Article: http://arxiv.org/abs/1804.02833

# Automated Swirl Detection Algorithm (ASDA) and Its Application to Simulation and Observational Data

Swirling motions in the solar atmosphere have been widely observed in recent years and suggested to play a key role in channeling energy from the photosphere into the corona. Here, we present a newly-developed Automated Swirl Detection Algorithm (ASDA) and discuss its applications. ASDA is found to be very proficient at detecting swirls in a variety of synthetic data with various levels of noise, implying our subsequent scientific results are astute. Applying ASDA to photospheric observations with a spatial resolution of 39.2 km sampled by the Solar Optical Telescope (SOT) on-board Hinode, suggests a total number of $1.62\times10^5$ swirls in the photosphere, with an average radius and rotating speed of $\sim290$ km and $< 1.0$ km s$^{-1}$, respectively. Comparisons between swirls detected in Bifrost numerical MHD simulations and both ground-based and space-borne observations, suggest that: 1) the spatial resolution of data plays a vital role in the total number and radii of swirls detected; and 2) noise introduced by seeing effects could decrease the detection rate of swirls, but has no significant influences in determining their inferred properties. All results have shown that there is no significant difference in the analysed properties between counter-clockwise or clockwise rotating swirls. About 70% of swirls are located in intergranular lanes. Most of the swirls have lifetimes less than twice of the cadences, meaning future research should aim to use data with much higher cadences than 6 s. In the conclusions, we propose some promising future research applications where ASDA may provide useful insights.

Original Article: http://arxiv.org/abs/1804.02931

# Incorporating Surface Convection into a 3D Babcock-Leighton Solar Dynamo Model

The observed convective flows on the photosphere (e.g., supergranulation, granulation) play a key role in the Babcock-Leighton (BL) process to generate large-scale polar fields from sunspots fields. In most surface flux transport (SFT) and BL dynamo models, the dispersal and migration of surface fields is modeled as an effective turbulent diffusion. Recent SFT models have incorporated explicit, realistic convective flows in order to improve the fidelity of convective transport but, to our knowledge, this has not yet been implemented in previous BL models. Since most Flux-Transport (FT)/BL models are axisymmetric, they do not have the capacity to include such flows. We present the first kinematic 3D FT/BL model to explicitly incorporate realistic convective flows based on solar observations. Though we describe a means to generalize these flows to 3D, we find that the kinematic small-scale dynamo action they produce disrupts the operation of the cyclic dynamo. Cyclic solution is found by limiting the convective flow to act only on the vertical radial component of the magnetic field. The results obtained are generally in good agreement with the observed surface flux evolution and with non-convective models that have a turbulent diffusivity on the order of $3 \times 10^{12}$ cm$^2$ s$^{-1}$ (300 km$^2$ s$^{-1}$). However, we find that the use of a turbulent diffusivity underestimates the dynamo efficiency, producing weaker mean fields and shorter cycle than in the convective models. Also, the convective models exhibit mixed polarity bands in the polar regions that have no counterpart in solar observations. Also, the explicitly computed turbulent electromotive force (emf) bears little resemblance to a diffusive flux. We also find that the poleward migration speed of poloidal flux is determined mainly by the meridional flow and the vertical diffusion.

Original Article: http://arxiv.org/abs/1804.03100

# Automated Detection Methods for Solar Activities and an Application for Statistic Analysis of Solar Filament

With the rapid development of telescopes, both temporal cadence and the spatial resolution of observations are increasing. This in turn generates vast amount of data, which can be efficiently searched only with automated detections in order to derive the features of interest in the observations. A number of automated detection methods and algorithms have been developed for solar activities, based on the image processing and machine learning techniques. In this paper, after briefly reviewing some automated detection methods, we describe our efficient and versatile automated detection method for solar filaments. It is able not only to recognize filaments, determine the features such as the position, area, spine, and other relevant parameters, but also to trace the daily evolution of the filaments. It is applied to process the full disk H-alpha data observed in nearly three solar cycles, and some statistic results are presented.

Original Article: http://arxiv.org/abs/1804.03320

# Rogue active regions and the inherent unpredictability of the solar dynamo

New developments in surface flux transport modeling and theory of flux transport dynamos have given rise to the notion that certain large active regions with anomalous properties (location, tilt angle and/or Hale/non-Hale character) may have a major impact on the course of solar activity in subsequent years, impacting also on the amplitude of the following solar cycles. Here we discuss our current understanding of the role of such "rogue" active regions in cycle-to-cycle variations of solar activity.

Original Article: http://arxiv.org/abs/1804.03427

# A Model of Sunspot Number with Modified Logistic Function

Solar cycles are studied with the new (version 2) monthly smoothed international sunspot number, the variations of which are found to be well represented by the modified logistic differential equation with four parameters: maximum cumulative sunspot number or total sunspot number $x_m$, initial cumulative sunspot number $x_0$, maximum emergence rate $r_0$, and asymmetry $\alpha$. A two-parameter function can be obtained by taking the parameters $\alpha$ and $r_0$ as fixed value. In addition, it is found that the two parameters $x_m$ and $x_0$ can be well determined at the start of a cycle based on the analysis of solar cycles $1-23$. Therefore, a prediction model of the sunspot number variations of solar cycles is established based on the two-parameter function. The prediction for cycles $4-23$ shows that the solar maximum can be predicted with relative error being 9\% at the start of the cycle, which is better than that of other fitting functions in the literature. Besides, our model can predict the cycle length with the relative error being 10\%. Furthermore, we predict the sunspot number variations of solar cycle 24 with the relative errors of the solar maximum and that of the ascent time being 8\% and 7\%, respectively, we also predict that the length of cycle 24 is $10.90\pm1.09$ years. The comparison to the observation of cycle 24 shows that our prediction model has good effectiveness.

Original Article: http://arxiv.org/abs/1804.03617